Drive shafts for upper-lower gearcase high-low profile sterndrive
High-low profile upper gearcase, electric shift outdrive, 400-800 series and OMC Cobra lower unit
drive shaft shimming video.
Upper gearcase press on ball gear conversion for years 1969 thru 1973.
Drive shaft adapter tool and pinion bearing puller or installation tools
When working with
400 and 800 series outdrives remember when the water pump shaft gets stripped the lower unit prop shaft will no longer turn
or will only turn with there is no load on the prop shaft, like the propeller not being in the water or running dry on the
driveway.
Electric shift lower gearcase
OMC Electric shift drive shaft 1972 to 1977
P/N 26-2012 (used) Electric shift outdrive years
1972 thru 1977 OEM-382285 $295.89
OEM-379515
P/N 26-2013 Electric shift years 1969 thru 1971 OEM-379515
$186.09
400-800 Stringer upper gearcase
22412 OMC upper drive shaft low profile
P/N 22412 Low profile units years 1973 to 1986
OEM-909121 $131.09
22422 Upper high profile V8-V6 OEM 981220
P/N 22422 OEM-981220 $350.09
22423 drive shaft high profile 4 cyl.
P/N 22423 Electric shift without centering cone OEM-382883
$278.09
P/N 22410 Water pump drive shaft OEM-909753 $139.09
400-800 Stringer lower gearcase
22413 drive shaft lower unit
P/N 22413 Lower unit 800 series 6-8 cylinder engines years 1978
thru 1986 $328.29
9824423-OMC
OEM P/N 9824423 400 series sterndrive used drive shaft 4 Cylinder
Contact order desk for pricing
Ball gear shafts
Ball gear shaft 2.8 inch
P/N 22-433 Used ball gear shaft length of 2.800 inches. Please
contact order desk or see video. Old press on ball gear change to this newer style taper shaft with nut $64.89
Ball gear length of 2.5 inches
P/N 22-431 (used) Ball gear length of 2-1/2 inches $64.89
Old ball gear
Press on ball gear
P/N 22-430 Ball gear (used - press on type) $84.89
